When a car is used for a long time, there must be some surface imperfections like swirl marks, light scratches. It’s time for your car to be polished. But a machine polisher does not work so well, sometimes it even will scratch or damage the car’s finish. As a result, many people choose to polish their car by themselves. To do this job, people can create the shine their desire.
Before you polish your car, you must wash it thoroughly as clean as possible. You will need a deep clean before you apply the polish. You can use a machine car wash; however, to remove all of the caked-on dirt, you may want to stick to hand washing the vehicle. Choose a wax designed specifically for automobile paint. A number of waxes contain scrubbing granules that can damage car surfaces, so choose carefully. Apply the polish to the face of the pad in a circle near the edge. Place the intake on a thick layer of newspapers on a table or work bench and make sure you have all the items you need to polish it within arm’s reach. Put on the gloves and protective eyewear before you handle the chemical products. Begin polishing at the hood of the car. Apply a thin coat of car wax and rub the wax evenly over the surface of the hood. Allow the wax to dry to a milky color before buffing.
When you are waxing the rest of surfaces of the car, be careful not to put wax on any chrome or rubber surfaces. Always work in one small area at a time, as the wax dries quickly and needs to be buffed as soon as it is dry. Coat the entire car in a second layer of wax, using the buffer on a polishing speed to get the highest shine possible from your car. Take care not to press down on the buffer and eat into your paint job. Add a straight line of polish to the part of the car in which you want to start. Just a dab of polish will be enough for each section. Then take your small, soft cloth and rub the polish in. Apply the polish to the desired area with a circular motion until it has been completely absorbed.
When you enjoy polishing your car, something about polishing a car you should know about: Use caution when running the buffer on your car. Pushing too hard on it will cause permanent damage to the surface of your vehicle. Do not try to use a rotor buffer without instruction, or you can seriously damage your paint. A dual-action orbital buffer is safe and will not burn the paint.